Sound the Charge!

I've now finished the trumpeter master figure as well. I was able to re-use the original legs and saddle from the Hussar figure as they survived relatively intact from the previous master mould. (You can see the "donated parts" in the photos, as the moulding process dyes the greenstuff darker). The upper torso etc is all new however.

I'm planning a couple of officer conversions of the basic hussar (which should be more straightforward than this figure). After I've done that they'll all be going into a production mould.

In The Flesh

Well, Metal actually. After a slight delay caused by a mix up with the Mould Makers (my fault entirely) I've got a few castings back from the Master Mould of the Hussar Figure. I'll be using this as the main figure for the unit, but want to do a few conversions in order to create a couple of officers and a trumpeter. These will then go into a production mould with this trooper figure in due course. In the interim, I've been painting some of the horses in anticipation. So here is a "raw" casting mounted up on a partially painted horse.

Back from a Break

Well its been a long time since the last post, principally because I haven't been doing any sculpting, and as that's the purpose of this Blog, I didn't see much point in putting up anything else.

Got sidetracked on to some painting, mainly a "Gilder style" unit of connoisseur French Napoleonic hussars. Pleased with the results, but it took a bit of time.

Anyway, got bored with painting, so its back to the sculpting for now. A while back I had made a dolly for a mounted figure, so I decided to have a go at taking one through to completion. First selection was a french hussar type, of the sort that could be used for Lauzun's Legion or similar units. It's basically a standard French Hussar outfit with no pelisse.

Anyway, here he is, officer and trumpeter etc to follow, once I get round to it.

Filling up the Ranks

Finally finished the grenadier and fusilier, to complete the set.












To give you an idea on size of the figure in comparison to some common makes, here he is in a line up of (from left to right) Front Rank, Foundry, Hinchliffe, our lad and finally an RSM. I was aiming for something that was of similar size and heft to the Hinchliffe/RSM type figure, but with a little more detail to ease painting, a compromise between "old school figures" and there modern "chunky, pumpkin head, baseball mitt" brethren. I'm fairly pleased with the results.

Lookout the boss is about

Finished the two officers and the standard bearer.

Playing for Time

Thanks for all the very positive comments, I must admit its fascinating painting up a figure you've sculpted yourself, you know exactly where everything is, and what it's meant to be. You also haven't got much grounds for complaint either!

Its been slow progress in the last week as "real life" took over for a while. However the drummer is now complete and the rest all partially finished, with smiling faces beaming out asking to be completed.

Final Countdown

A few months ago, it started to become apparent to me that it was going to take me an awful long time to make up and cast the figures I had sculpted, and that time was something I just don't have at present. However I was keen to move the project forward.

In an attempt to resolve this I ended up getting the first master (the Fusilier) moulded and cast for me into a proper production mould by Griffin Moulds (link at side). At the time I was quite happy to do this, as I knew that I would want, over time, several units of this figure and the number of figures I would require would justify the cost (or at least that's what I told myself!). Anyway the figures duly came back and I was delighted with them, very nice, clean castings.

As time moved on, I have to admit that I gave in to temptation (or perhaps laziness) and just thought well in for a penny, in for a pound, and got the rest of the masters done in the same way. It was a bit of an extravagance on my part, but I'm content I made the right move.

So happily in the ownership of some production moulds, I had a batch of figures cast up of all the types, sufficient to make up a few units. I could have got more done, but don't want to put myself off with a Lead mountain. Anyway now I've got the moulds I can go back for more anytime, and no freezing in the garage pouring hot metal about!

The packaged arrived on Friday, and I'm busily in the process of painting one each of the seven figures to see how they look. Initial progress looks good.




When I paint figures for the first time, I usually do one right through to the end to test the colour scheme/paint combinations, to make sure I'm happy with this, before I do a whole unit.

So in no particular order I painted the Chasseur through to a conclusion, and here he is:





He's painted as a Chasseur of the Soissonnois regt in the 1779 uniform, with rather fetching crimson facing colour. I've pictured him prior to the application of varnish.

I wouldn't mind views on a couple of points on the paint job. Firstly as most will be aware, the french uniform of this period has an awful lot of white, something that personally I find difficult to do well in 25mm. In an attempt to break up the expanse of rather boring white, I've cheated a little and made the waistcoat and breeches more of a cream, just to give a bit on contrast. What do you think, does it work or would it just be better in white the same as the coat and gaiters?

On a similar vein, I've gone with white gaiters, but black is a theoretical option, again not sure which way to go on that one.





Anyway I'll press on and finish the rest, and post them up over the next week as their completed.

Overall, I'm pleased with this little project, its taken a bit of time, longer than I would have wished, but we've gone from this:

To this:


And I hope this has been a useful journey for those of you who have travelled it with me.

Back in a few days, with more shots of painted figs.

Cheers


John